Pre-calc 11 Clear前微积分 11 一看就懂 🎧

Graphs & characteristics图象与特征

⏱ Course-level: about 25 min课程要求:约 25 分钟★ Essential必会

🎧 Listen to this听这一点 3–6 min

✅ Enough for this course when you can…能做到这些,这门课就够了…

  1. ↓
  2. ↓
  3. ↓
  4. ↓

Can do these? Move on — the rest of this page is there if you need it.这些都能做到?往下走——这页其余的内容需要时再回来看。

🅿️ Beyond this course — park it超出这门课——先存起来
  • Finding the vertex with derivatives, and graphs of cubics — calculus and Pre-calc 12.用导数找顶点、三次函数的图象——微积分和前微积分 12。
  • Level 4 (#8) is a stretch — try it later, if you want to.4 级题(#8)是拓展——以后想做再做。
  • Second and third solution methods: one method you trust is enough for now.第二、第三种解法:现在掌握一种你信得过的就够了。
  • "Watch it another way" and "More resources": at most one video, and only if you are stuck.「多角度看」和「更多资源」:最多看一个视频,而且只在卡住时看。

My Park-it list我的「先存起来」清单 →

Where the time comes from时间是怎么算的

8 read the key points + 6 one worked example + 15 the Level 1–2 practice + 5 one Level 3 + 3 check the bar = 37 min, × 0.8 difficulty × 0.85 test weight ≈ 25.2 → about 25 min.读要点 8 + 看一道例题 6 + 1–2 级练习 15 + 一道 3 级题 5 + 对照「够了」检查 3 = 37 分钟,× 难度 0.8 × 考试分量 0.85 ≈ 25.2 → 约 25 分钟。

A budget is for planning, not a deadline. Your own times on My time teach you your real pace.预算是用来计划的,不是截止时间。「我的时间」里你自己的记录,会告诉你真实的节奏。 My time我的时间 →

📌 Key points要点

⭐ Must know必须记住
  • opens up (minimum), opens down (maximum); the vertex sits on the axis . 开口向上(有最小值), 开口向下(有最大值);顶点在对称轴 上。
  • Range uses the vertex y-value: (up) or (down). Domain is always all real numbers.值域看顶点的纵坐标:开口向上 ,向下 。定义域永远是全体实数。
  • Axis = midpoint of the zeros, or of any two points at the same height.对称轴 = 两个零点的中点,或任意两个等高点的中点。

💡 A basketball shot, a jet of water, a satellite dish — all parabolas. Six facts (vertex, axis, max/min, domain, range, intercepts) tell you everything about the curve.投篮的轨迹、喷泉的水柱、卫星锅的截面都是抛物线。顶点、对称轴、最值、定义域、值域、截距——掌握这六样,就看懂了整条曲线。

  1. A quadratic function is with . Its graph is a parabola: opens up if (has a minimum), opens down if (has a maximum).二次函数是 (),图象是抛物线: 开口向上,有最小值; 开口向下,有最大值。
  2. The vertex sits on the axis of symmetry , exactly halfway between the x-intercepts. Plug that x back in to get the max or min value.顶点在对称轴 上,正好在两个 x 截距的正中间。把这个 x 代回去,就得到最大值或最小值。
  3. Domain is always all real numbers. Range stops at the vertex: if it opens up, if it opens down (where is the y-value of the vertex).定义域永远是全体实数。值域到顶点为止:开口向上是 ,开口向下是 ( 是顶点的纵坐标)。
  4. y-intercept: set , so it is just . x-intercepts (zeros, roots): set and solve. means "the y-value when ".y 截距:令 ,就是 。x 截距(零点、根):令 解方程。 的意思是「 时的 y 值」。

🧮 Key formulas关键公式

Axis of symmetry of 的对称轴
Axis is the midpoint of the x-intercepts and 对称轴是两个 x 截距 、 的中点
(1, 4)
🕹️ Try it: slide a, h and k动手试:拖动 a、h、k

Drag the sliders; the picture and the line of algebra change together. Nothing here is graded.拖动滑块,图和下面的算式会一起变。这里不评分,随便玩。

This picture needs JavaScript.这张图需要开启 JavaScript。

🎯 Test tip考试提示
Find the axis first — it gives the vertex, the max/min and the range in two lines. When the quadratic factors, the midpoint of the zeros is the fastest axis.先求对称轴,两行就能得到顶点、最值和值域。能分解时,用两个零点的中点求对称轴最快。
↑ Contents目录

🧭 How to get started怎么入手

Ask yourself these five, in order, before writing anything. Every worked example on this page is labelled with them.动笔之前,按顺序问自己这五个问题。本页每道例题的步骤都标了它们。

  1. 🔎 Given已知
    Write down , and with their signs. The sign of already tells you: up (minimum) or down (maximum).先写下带符号的 、、。 的符号已经告诉你:开口向上(有最小值)还是向下(有最大值)。
  2. 🎯 Asked求什么
    Which of the six facts are wanted? Remember that a max or min VALUE is a y-value, and the range is about .题目要六项特征中的哪几项?记住:最大值或最小值是一个 y 值,值域讲的也是 。
  3. ✏️ Picture it画出来
    A quick U or ∩ with a dashed vertical line for the axis. The vertex sits on that line, and the two x-intercepts are mirror images across it.随手画个 U 或 ∩,再画一条竖直虚线当对称轴。顶点在这条线上,两个 x 截距关于它对称。
  4. 🧰 Tool用什么工具
    Axis first: (or the midpoint of the zeros). Put that back into to get the vertex height.先求对称轴:(或两个零点的中点)。把这个 代回 ,得到顶点的高度。
  5. ✅ Check检验
    The zeros must be equally far from the axis. The range must use the vertex y-value, with for up and for down.两个零点到对称轴的距离必须相等。值域要用顶点的纵坐标:开口向上用 ,向下用 。
↑ Contents目录

🧱 Prerequisite check先修检查

4 quick Grade 9–10 questions, about 3 minutes. Miss one and a 5-minute repair card opens right there; fix it, then carry on.4 道九、十年级小题,约 3 分钟。错了就在原地打开 5 分钟补救卡,补好再继续。

1Negative numbers: add, subtract, multiply负数的加减乘
Evaluate .求 的值。
2Fractions: add, subtract, multiply, divide分数的四则运算
Evaluate .求 的值。
3Negative numbers: add, subtract, multiply负数的加减乘
What number is exactly halfway between and ?正好在 和 中间的数是多少?
4Factoring (product and sum)分解 (积与和)
Solve .解 。
↑ Contents目录

🪜 Worked → fill in → your turn例题 → 填空 → 自己做

Three versions of one idea: read a full solution, then finish a half-done one, then do one yourself with hints you open one at a time.同一个思路的三个版本:先看完整解答,再补全半成品,最后自己做——提示一次只开一个。

① Worked example — read it完整例题——看懂
For , find the vertex, axis, minimum or maximum value, domain, range and intercepts.对于 ,求顶点、对称轴、最值、定义域、值域和截距。
  1. 🔎 Given已知
    , , . Since , it opens up and has a minimum.,,。,开口向上,有最小值。
  2. 🎯 Asked求什么
    Six facts are wanted. The minimum value will be the y-value of the vertex.要求六项特征。最小值就是顶点的纵坐标。
  3. 🧰 Tool用什么工具
    Axis: . Vertex height: , so the vertex is and the minimum value is .对称轴:。顶点高度:,顶点 ,最小值 。
  4. 🧰 Tool用什么工具
    Domain: all real numbers. Range: .定义域:全体实数。值域:。
  5. 🧰 Tool用什么工具
    y-intercept: . x-intercepts: , so and .y 截距:。x 截距:,得 、。
  6. ✅ Check检验
    The midpoint of and is , the same as the axis ✓. 与 的中点是 ,和对称轴一致 ✓。
✔
Vertex ; axis ; minimum ; domain all real numbers; range ; y-intercept ; x-intercepts and 顶点 ;对称轴 ;最小值 ;定义域为全体实数;值域 ;y 截距 ;x 截距 和
② Same idea — you fill the gaps同一思路——你来补空
For , find the vertex, the maximum or minimum value, the range and the intercepts.对于 ,求顶点、最值、值域和截距。
  1. 🔎 Given已知
    , , . Since , it opens down and has a maximum.,,。,开口向下,有最大值。
  2. 🧰 Tool用什么工具
    ✍️
    Your turn: find the axis. There are two minus signs to keep.轮到你:求对称轴。有两个负号要留住。
  3. 🧰 Tool用什么工具
    ✍️
    Your turn: put into . Use brackets for the square.轮到你:把 代入 ,平方时加括号。
  4. 🧰 Tool用什么工具
    y-intercept . x-intercepts: , , so and .y 截距 。x 截距:,,得 、。
  5. ✅ Check检验
    ✍️
    Your turn: check the zeros against the axis.轮到你:用对称轴检验两个零点。
Answer答案
Vertex ; maximum ; range ; y-intercept ; x-intercepts and 顶点 ;最大值 ;值域 ;y 截距 ;x 截距 和
③ Your turn — on paper first轮到你——先在纸上做
For , find the vertex, the minimum value and the range.对于 ,求顶点、最小值和值域。
✏️ More worked examples, harder ones too更多例题(含更难的)
Example 1例 1L2 Apply会做
The graph shows . State the vertex, axis of symmetry, max or min value, domain, range, y-intercept and x-intercepts.图中是 。写出顶点、对称轴、最大或最小值、定义域、值域、y 截距和 x 截距。
  1. 🔎 Given已知
    , so it opens down and has a maximum.,开口向下,有最大值。
  2. 🧰 Tool用什么工具
    Axis: . Vertex: , so the vertex is and the maximum value is .对称轴:。顶点纵坐标:,顶点 ,最大值 。
  3. 🧰 Tool用什么工具
    y-intercept: . x-intercepts: , so and .y 截距:。x 截距:,得 、。
  4. 🧰 Tool用什么工具
    Domain ; range .定义域 ;值域 。
Answer答案
🧭 What this example trains这道题练什么
🎯 Goal考查目标
Read all six characteristics of a parabola from its graph and confirm each with algebra.从图象读出抛物线的六项特征,并用代数逐项验证。
💪 Abilities锻炼的能力
📊 Representations多种表示📘 Concepts概念理解⚙️ Fluent procedures运算熟练
💡 Key idea解题思路
Find the axis first; the vertex, maximum and range follow from it.先求对称轴 ,顶点、最大值、值域都由它而来。
🔀 Other ways to think不同的思考方式
  • Read the vertex and intercepts off the graph, then confirm with algebra.先从图上读出顶点和截距,再用代数验证。
  • Skip the graph: use for the axis and factor for the intercepts.不看图:用 求对称轴,用分解求截距。
Example 2例 2L2 Apply会做2 methods种解法
For : find , the axis of symmetry, the vertex and the range.对于 :求 、对称轴、顶点和值域。
  1. 🧰 Tool用什么工具
    .。
  2. 🧰 Tool用什么工具
    Axis: . Vertex: , so .对称轴:。顶点:,即 。
  3. 🧰 Tool用什么工具
    opens up, so the range is . 开口向上,所以值域是 。
Answer答案
🧭 What this example trains这道题练什么
🎯 Goal考查目标
Evaluate a function value, then find the axis, vertex and range of a quadratic.求函数值,再求二次函数的对称轴、顶点和值域。
💪 Abilities锻炼的能力
⚙️ Fluent procedures运算熟练📘 Concepts概念理解
💡 Key idea解题思路
Axis first, then plug the axis x-value back in for the vertex height.先求对称轴,再把这个 x 代回去得到顶点纵坐标。
🔀 Other ways to think不同的思考方式
  • Use .用 。
  • Factor to get the zeros; the axis is their midpoint.分解得零点,对称轴是零点的中点。
Example 3例 3L3 Connect会用2 methods种解法
For : find every characteristic (vertex, axis, max/min, domain, range, intercepts), then solve and explain the answer using symmetry.对于 :求出全部特征(顶点、对称轴、最值、定义域、值域、截距),再解 ,并用对称性解释结果。
  1. 🔎 Given已知
    : opens down, so the vertex is a maximum.:开口向下,顶点是最高点。
  2. 🧰 Tool用什么工具
    Axis: .对称轴:。
  3. 🧰 Tool用什么工具
    Vertex: . Vertex , maximum value .顶点:。顶点 ,最大值 。
  4. 🧰 Tool用什么工具
    Domain , range .定义域 ,值域 。
  5. ✅ Check检验
    y-intercept: . x-intercepts: , so and . Check: their midpoint is ✓.y 截距:。x 截距:,得 、。验算:两者中点是 ✓。
  6. 🧰 Tool用什么工具
    : , so or .:,得 或 。
  7. ✏️ Picture it画出来
    Why two answers? The point is the y-intercept, 2 units right of the axis . Its mirror image is 2 units left: .为什么有两个解? 是 y 截距,在对称轴 右边 2 个单位;它的对称点在左边 2 个单位,就是 。
Answer答案
🧭 What this example trains这道题练什么
🎯 Goal考查目标
Find every characteristic of a parabola, then use symmetry to explain why has two solutions.求出抛物线的全部特征,并用对称性解释 为什么有两个解。
💪 Abilities锻炼的能力
🔗 Connecting ideas知识联系📊 Representations多种表示🔍 Checking & reasoning检验与推理
💡 Key idea解题思路
A horizontal line meets the parabola at two mirror-image points, equally far from the axis.一条水平线与抛物线相交于两个镜像点,它们到对称轴的距离相等。
🔀 Other ways to think不同的思考方式
  • Solve algebraically by factoring.用分解法代数解 。
  • Use symmetry: the y-intercept is 2 right of the axis, so its mirror is 2 left.用对称性:y 截距 在对称轴右侧 2 个单位,镜像点就在左侧 2 个单位。
  • Sketch from the intercepts and read the answer off the picture.先由截距画草图,再从图上读答案。
🎬 Video walkthrough of this example这道例题有视频讲解 ↓
↑ Contents目录

🔍 Common mistakes常见错误

Someone made each of these. Tap the line where it first goes wrong.每道题都有人这样做过。点出第一处出错的那一行。

1Losing the minus sign in the axis对称轴丢了负号
Find the vertex of .求 的顶点。
2Writing the range with the x-value of the vertex用顶点横坐标写值域
Find the range of .求 的值域。
3Range in the wrong direction值域方向写反
Find the range of .求 的值域。
4Squaring a negative input without brackets代入负数平方时没加括号
For , find .对于 ,求 。
5Taking a given point as the top把题目给的点当成最高点
A parabola opens down, has x-intercepts and , and passes through . Find its maximum value.一条开口向下的抛物线,x 截距为 和 ,且过点 。求它的最大值。

⚠️ Quick list速查

  • Getting the sign of the axis wrong: for , , not . Write the minus sign in front before you plug in.对称轴符号算反: 的对称轴是 ,不是 。代数之前先把前面的负号写上。
  • Writing the range with or using the x-value of the vertex. Range is about and uses the vertex y-value: vertex opening up gives .值域写成关于 的,或者用了顶点的横坐标。值域讲的是 ,用顶点纵坐标:顶点 开口向上,值域 。
  • Evaluating for as . Brackets first: .把 的 算成 。要先算括号:。
↑ Contents目录

🎬 Watch it from different angles多角度看

🏠 This site’s walkthrough本站讲解

Example 3例 3: For : find every characteristic (vertex, axis, max/min, domain, range, intercepts), then solve and explain the answer using symmetry.对于 :求出全部特征(顶点、对称轴、最值、定义域、值域、截距),再解 ,并用对称性解释结果。

💡 Why it works为什么成立

Visual introduction to parabolas
Khan Academy · 9 min · ↗
A calm picture of all six words this topic uses, before any formula. The 6:20 part is the check in our routine: the zeros must be equally far from the axis.在讲任何公式之前,先把本节用到的六个词用图讲清楚。6:20 那段就是我们五问里的检验:两个零点到对称轴的距离必须相等。
⏩ About 8 minutes, pictures only (no equations yet). 0:00 opening up or down. 2:20 the vertex is the lowest point of an upward parabola and the highest point of a downward one. 3:20 the axis of symmetry is the fold line through the vertex (, , for his three curves). 5:00 the y-intercept. 5:40 a parabola can cross the x-axis twice. 6:20 the two x-intercepts, 1 and 6, are both 2.5 from the axis , so the axis is their midpoint. 7:00 a parabola can also have no x-intercepts.约 8 分钟,只看图(还没有方程)。0:00 开口向上和向下。2:20 顶点是开口向上抛物线的最低点、开口向下抛物线的最高点。3:20 对称轴是过顶点的「折痕」(他的三条曲线分别是 、、)。5:00 y 截距。5:40 抛物线可以和 x 轴交两次。6:20 两个 x 截距 1 和 6 到对称轴 的距离都是 2.5,所以对称轴是它们的中点。7:00 抛物线也可能没有 x 截距。

🪜 Step by step一步一步

Quadratic Functions (II): Vertex, Domain & Range STEP-BY-STEP GUIDE - Pre-Calculus 11, Algebra II
Mathsupport · 10 min · ↗
BC-made, and the 1-3-5 step pattern is a fast way to sketch the curve once you have the vertex, which is the picture step of our routine.BC 本地制作;1、3、5 的步长规律能让你求出顶点后很快画出草图,正是五问里「画图」那一步。
⏩ About 9.5 minutes, made for BC Pre-Calculus 11. 0:00 the vertex, and the max or min VALUE is its y-value; the axis is the vertex x-value. 1:20 the domain is all real numbers (the auto-captions mishear it), and the range stops at the max or min. 2:20 the step pattern of : from the vertex go 1 over and 1 up, then 1 over and 3 up, then 5, then 7; for every step doubles (2, 6, 10). Around 3:00 her spoken numbers get muddled ("between nine and five that's plus five"); the table on screen is 9, 4, 1, 0 with differences 5, 3, 1. 7:00 intercepts in Desmos for , (no x-intercepts) and . She does not use .约 9.5 分钟,为 BC Pre-Calculus 11 制作。0:00 顶点;最大值或最小值指的是顶点的纵坐标;对称轴是 顶点横坐标。1:20 定义域是全体实数(自动字幕听错了),值域到最值为止。2:20 的步长规律:从顶点出发,右 1 上 1,再右 1 上 3,然后上 5、上 7; 的每一步都翻倍(2、6、10)。约 3:00 她嘴上说的数有点乱(「九和五之间是加五」),屏幕上的表是 9、4、1、0,差是 5、3、1。7:00 在 Desmos 上看 、(没有 x 截距)和 的截距。她没有用 。
How to graph, find range, domain, vertex, and axis of symmetry from a quadratic
Brian McLogan · 7 min · ↗
Shows the order our topic uses: vertex first, then max or min, then domain, then range from the vertex y-value. Watch it after example 1, since it starts from vertex form.示范了本节的顺序:先顶点,再最值,再定义域,最后用顶点纵坐标写值域。它从顶点式出发,建议做完例 1 再看。
⏩ About 6 minutes, a classroom recording on . 0:20 he reads the vertex from vertex form; he writes , which is our . 1:20 plot the vertex and the axis , then mirror points across it. 2:40 he says "horizontally compresses" the graph; our course calls the same thing a vertical stretch by 4, so the curve looks narrower. 4:20 the vertex is a minimum because it opens up. 4:40 domain all real numbers. 5:20 range from the lowest y-value, 0, written , which means .约 6 分钟,课堂录像,讲 。0:20 他从顶点式读出顶点;他写的 就是我们的 。1:20 描出顶点 和对称轴 ,再画对称点。2:40 他说 会让图象「水平压缩」;我们课本把同一件事叫作纵向伸长为 4 倍,所以曲线看起来更窄。4:20 开口向上,所以顶点是最低点。4:40 定义域为全体实数。5:20 值域从最小的 y 值 0 开始,写作 ,意思是 。

📝 Test-style problems考题实战

How To Find The Domain and Range of a Quadratic Function
The Organic Chemistry Tutor · 10 min · ↗
The last two examples, from 7:00, are exactly our two routes to the axis: the midpoint of the zeros when it factors, and when it does not.从 7:00 起的最后两题正好是我们求对称轴的两条路:能分解就用零点中点,不能分解就用 。
⏩ About 11.5 minutes; pause before each answer. 0:00 domain and range of and . 2:20 shifted graphs such as and . 4:20 and . 7:00 a standard-form one that factors: , zeros 1 and 3, axis at the midpoint , vertex , range from up. 9:20 one that does not factor: , , vertex , range from up. He writes ranges in interval notation: means .约 11.5 分钟;每题先暂停再看答案。0:00 和 的定义域与值域。2:20 平移后的图象,如 、。4:20 和 。7:00 一个能分解的一般式:,零点 1 和 3,对称轴在中点 ,顶点 ,值域从 往上。9:20 一个不能分解的:,,顶点 ,值域从 往上。他用区间记号写值域: 就是 。

Videos load only when you tap them (privacy-enhanced YouTube). The ▶ time is where the useful part starts.点了才加载视频(YouTube 隐私增强模式)。▶ 后的时间是值得看的部分的开头。

↑ Contents目录

🧰 More resources更多资源

tap to open点开

🔭 More to explore延伸阅读与讲解

Links open other websites. A video loads only after you tap it, and starts where the idea is explained.链接会打开其他网站。视频点一下才加载,并从讲到这个概念的地方开始。

📈 Draw it yourself in Desmos在 Desmos 里自己画

  • y=x^2
    The simplest parabola: vertex at (0, 0), axis of symmetry x = 0最简单的抛物线:顶点 (0,0),对称轴 x=0

Open the free Desmos graphing calculator打开免费的 Desmos 图形计算器 · No account needed. Paste the line, press Enter.不用注册。粘贴这一行,按回车。

🕹️ Interactive互动

  • Quadratic function graph (sliders for a, b, c) GeoGebra community · ●○○ · ⏱ 8′
    Drag a, b, c and watch vertex, axis and roots change.拖动 a、b、c,看顶点、对称轴和根怎么变。
  • Picture Perfect Parabolas Desmos Classroom · ●●○ · ⏱ 15′
    Desmos activity about what the numbers in (h,k) do to a parabola.Desmos 互动活动:看 (h,k) 怎样移动抛物线。

📖 Reading阅读

  • Quadratic functions OpenStax Algebra and Trigonometry 2e · ●●○ · ⏱ 20′
    Free college-level textbook section with worked examples and practice.免费的大学教材小节,有例题和练习。
  • Parabolas Paul's Online Math Notes (Lamar University) · ●●○ · ⏱ 15′
    Short college notes with many worked examples and practice problems.大学出的简明讲义,例题多,附练习题。

🎧 Audio音频

  • How to think about it这个知识点怎么想 · 6–10 min
  • Common mistakes常见错误 · 4–6 min
  • Five-minute lying-down review躺着听的五分钟复习 · ≈5 min
↑ Contents目录

🧠 Mind map思维导图

tap to open点开
mindmap
  root(("Graphs & characteristics"))
    b1["Need first"]
      n2["Negative numbers: add, subtract, multiply"]
      n3["Fractions: add, subtract, multiply, divide"]
      n4["Factoring x²+bx+c (product and sum)"]
    b5["Five questions"]
      n6["Given"]
      n7["Asked"]
      n8["Picture it"]
      n9["Tool"]
      n10["Check"]
    b11["Key tools"]
      n12["Axis of symmetry of y=ax²+bx+c"]
      n13["Axis is the midpoint of the x-intercepts r and s"]
    b14["Watch out"]
      n15["Losing the minus sign in the axis"]
      n16["Writing the range with the x-value of the vertex"]
      n17["Range in the wrong direction"]
      n18["Squaring a negative input without brackets"]
      n19["Taking a given point as the top"]
    b20["Leads to"]
      n21["Vertex form & transformations"]
      n22["Choosing a method & word problems"]
      n23["Quadratic inequalities (sign analysis)"]
mindmap
  root(("图象与特征"))
    b1["先要会"]
      n2["负数的加减乘"]
      n3["分数的四则运算"]
      n4["分解 x²+bx+c(积与和)"]
    b5["五个问题"]
      n6["已知"]
      n7["求什么"]
      n8["画出来"]
      n9["用什么工具"]
      n10["检验"]
    b11["关键工具"]
      n12["y=ax²+bx+c 的对称轴"]
      n13["对称轴是两个 x 截距 r、s 的中点"]
    b14["当心"]
      n15["对称轴丢了负号"]
      n16["用顶点横坐标写值域"]
      n17["值域方向写反"]
      n18["代入负数平方时没加括号"]
      n19["把题目给的点当成最高点"]
    b20["通向"]
      n21["顶点式与图象变换"]
      n22["选方法与应用题"]
      n23["二次不等式(符号分析)"]

Colours: each branch is one kind of thing — what you need first, how to start, the tools, the traps, where it leads.颜色:每个分支是一类东西——先要会的、怎么入手、工具、陷阱、通向哪里。

↑ Contents目录

🎯 Quiz测验

⚡ Quick checks — instant feedback快速检查——马上知道对不对

Type each answer and press Check. A wrong answer is not a mark against you: it comes back tomorrow, then in 3 days, a week and two weeks.写下答案按「提交」。答错不扣分:它会明天再出现,然后是 3 天、一周、两周后。 Mixed practice from all topics →各知识点混合练习 →

1. The axis of symmetry of is ? 的对称轴是 ?
2. The vertex of is . Find the y-value. 的顶点是 ,求 y。
3. Find the x-intercepts of .求 的 x 截距。
x = and x =
4. What is the y-intercept of ? 的 y 截距是多少?
5. opens ___ and has a ___ value of 4. 开口向___,有___值 4。

🗣️ Explain it back用自己的话讲一遍

A friend asks: how do I get the axis of symmetry and vertex of without drawing? Tell them.朋友问:不画图,怎样求 的对称轴和顶点?请告诉她。

Saved only in this browser.只保存在这个浏览器里。

L1 Know · L2 Apply · L3 Connect · L4 Solve. Try first, then the hint, then the solution — and mark yourself honestly: it builds your review plan.L1 知道 · L2 会做 · L3 会用 · L4 会想。先自己做,再看提示,最后看过程——如实给自己打分,复习计划就是据此生成的。

1L2 Apply会做⚙️ Fluent procedures运算熟练📘 Concepts概念理解
For , find the axis of symmetry and the vertex.求 的对称轴和顶点。
2L1 Know知道⚙️ Fluent procedures运算熟练
If , then equals:若 ,则 等于:
3L2 Apply会做⚙️ Fluent procedures运算熟练📘 Concepts概念理解📊 Representations多种表示
For , state the vertex, max or min value, and range.对 ,写出顶点、最值和值域。
4L2 Apply会做⚙️ Fluent procedures运算熟练📊 Representations多种表示
Find the x-intercepts and y-intercept of .求 的 x 截距和 y 截距。
5L1 Know知道📘 Concepts概念理解
A parabola has x-intercepts and and a minimum value of . What is its vertex?一条抛物线的 x 截距是 和 ,最小值为 。顶点是什么?
6L3 Connect会用📘 Concepts概念理解📊 Representations多种表示🔍 Checking & reasoning检验与推理
The points and are on a parabola whose vertex has y-value . Find the vertex and the range if the parabola opens up.点 和 在一条抛物线上,顶点纵坐标为 ,开口向上。求顶点和值域。
7L3 Connect会用🔗 Connecting ideas知识联系⚙️ Fluent procedures运算熟练📊 Representations多种表示
For , find all with , and the minimum value of .对 ,求所有使 的 ,以及 的最小值。
8L4 Solve会想🌍 Modelling建模🔗 Connecting ideas知识联系🔍 Checking & reasoning检验与推理
A decorative fountain in a Vancouver plaza shoots a jet of water from a nozzle at ground level, and the jet lands 6 m away. At 1 m from the nozzle the water is 2.5 m high. Let be the horizontal distance from the nozzle. (a) Find the equation of the path and the maximum height. (b) Between which two horizontal distances is the water at least 4 m high? Use symmetry to explain why the answers are where they are.温哥华广场上的装饰喷泉从地面的喷嘴射出一股水柱,落点距喷嘴 6 m。距喷嘴 1 m 处水柱高 2.5 m。设 为到喷嘴的水平距离。(a) 求水柱路径的方程和最大高度。(b) 水柱在哪两个水平距离之间高度至少 4 m?用对称性解释为什么答案落在那两处。

How well do you know this now?现在掌握得怎样?

Your answer schedules the next review: 1 → tomorrow, 2 → in 3 days, 3 → in a week.你的选择决定下次复习:1 → 明天,2 → 3 天后,3 → 一周后。

🃏 Flashcards — tap to flip记忆卡片——点一下翻面
↑ Contents目录